Garage Improvement

The full body is made of Cast Iron for bearing ultimate compressive stress. The design is so much scientific that each of the small places of the body is utilized with small specifications with a weight of 60 pounds.

In this design, the bore diameter is larger with the stroke length than others. For this, at a time a much amount of air can be compressed.

At the time of loading air, there is created a huge level of noise from a running generator. But this generator has a quality of low noise with a 2 HP power output. The pump has a speed of 1720 RPM that is considered as higher speed in motor specifications.

There is a proper MCCP, which saves the motor by cutting power source if there is high or low voltage or short circuit. Another side, the rotating parts are always submerged with lubricants for less wear.

The compressor has a dimension of 18*22*10 inches. So it is portable. For easy portability, it has a Cast Iron made a handle for supporting full body. It has a primary electric connection of 120 volts.

There is a suitable pressure gauge to measure the air pressure at a time. The pressure valve controls the exceed pressure and releases it to the environment and another side it cuts the power source. Not only have these, but also one can get an output of a set amount of pressure by controlling the nozzle.

It has a primary warranty of 1 year, and after that one can extend the warranty from the company sites. The company provides the same warranty for each part. If there is any failure in the warranty period, the company replaces it right then.

For regular uses and for more longevity, there must be a proper lubricant and the lubricant is high in price. The bore must be opened at a time for releasing air. Moreover, at the time of loading the valves must be checked carefully as closed.

The air compressor is not suitable for the domestic current source, it must be connected with the commercial source for getting large power input and also avoiding exceed load.