Air compressor for home garage. Best oil lubricated compressors

The full body is made of Cast Iron for bearing ultimate compressive stress. The design is so much scientific that each of the small places of the body is utilized with small specifications with a weight of 60 pounds.

In this design, the bore diameter is larger with the stroke length than others. For this, at a time a much amount of air can be compressed.

At the time of loading air, there is created a huge level of noise from a running generator. But this generator has a quality of low noise with a 2 HP power output. The pump has a speed of 1720 RPM that is considered as higher speed in motor specifications.

There is a proper MCCP, which saves the motor by cutting power source if there is high or low voltage or short circuit. Another side, the rotating parts are always submerged with lubricants for less wear.

The compressor has a dimension of 18*22*10 inches. So it is portable. For easy portability, it has a Cast Iron made a handle for supporting full body. It has a primary electric connection of 120 volts.

There is a suitable pressure gauge to measure the air pressure at a time. The pressure valve controls the exceed pressure and releases it to the environment and another side it cuts the power source. Not only have these, but also one can get an output of a set amount of pressure by controlling the nozzle.

It has a primary warranty of 1 year, and after that one can extend the warranty from the company sites. The company provides the same warranty for each part. If there is any failure in the warranty period, the company replaces it right then.

This air compressor is tiny for portable and its shape is like a pancake. It has a weight of 30 lb, for this, it is so easy to carry here and there.

This air compressor has a 6-gallon tank for loading the air. Not only are these there 3 types of filter to purify the air for running other mechanisms.

There is a high power Servo Motor, which has a suitable power output with its maximum efficiency. The motor is totally insulated and if there is cold weather, it can provide normal power.

As we know the generator makes a noise while running and sometimes it is not tolerable. But this motor has the lowest noise level of 75.5 dBA. That means, while it is running there is created a normal environment.

This model has a high flow regulator to supply the air at much quantity at a time. For this valve one can full the sink with respect to slow besides supplying the air.

The Ball Drain valve is used for safety purposes to control the air pressure at the time of draining and inside the sink and also at the air oncoming point. There are protective rubber legs for less friction to the ground and also it resists marring.

There are two universal couplers for easy support and also there is convenient cords wrap for users. There are some sensors to automatic load the air and compress with suitable pressure with respect to draining.

As the power input is high, so there is used of a circuit breaker if there is overload, short circuit or air leakage. The full setup has a 1 year of manufacturing warranty with all genuine parts.

The tank is made of stainless steel with insulation for avoiding air leakages. The tank is of 6 gallon which is so much efficient for regular uses.

The air compressor has an air output of 150 PSI at a time. The pressure flow can be changed from 90-150 PSI with respect to purposes.

There is a use of high torque motor that can give a suitable power output inspite of changing in weather. The high torque producing motor is fully automated with respect to the sink’s condition, whether it is empty or not.

The congested setup can be ported easily for having a handle for easy user’s interface. The legs are covered with rubber guards for less friction and locking with a ground.

There is a high flow regulator, which controls the flow of air while intaking and also exhausting. There is also pressure gauge to measure the vent pressure and sink pressure simultaneously.

According to designs, the motor has a low noise level, so that it can be placed in a natural environment with a range of 75 DbA.

Most of the pumps have a lubricant for the motor’s rotor. But this design has no uses of lubricant that is very efficient for users. For this, the maintenance cost becomes less and affordable and also there are no marks of oil strain.

The setup has launched in the market with the pneumatic valves, Automatic Air Tools and setup of opening tools for internal operations. The product has one year of manufacturing warranty including all parts.

The air compressor is larger than other. The compressor has 8 Gallon compressed air capacity at a time. It is a comparatively huge amount of Steel made sink for users.

According to designs, the motor is 50 percent quieter in producing noise. The noise range is around 68 DbA. For this, the setup can be set in the natural environment as the domestic scenario.

The design is made of totally oil free- so that there will not be a single oil strain. So, the user has to pay less for maintenances. The Dual Piston pump is run by compressed air in the cyclic process.

The induction motor can provide the ultimate pressure of 125 PSI at a time, which is averagely large for the users.

The setup can be used for painting, nailing, fastening, vehicles air intaking, and also for uplifting small hydraulics in mini-workshop.

There is Nylon made tires to portable from one place to another. The rubber guards prevent external friction and also increase holding strength while running and also creating vibrations.

Each bundle of this setup comes with 25 Ft. Air Hose with the 17 pieces of nozzles, chuck, and gauge, and also 3 in 1 inflation gun in affordable price. For this, the users have no need to purchase these accessories externally.

There is proper pressure gauge to control the pressure from the inlet to the outlet. Not only have these, but also there is a proper circuit breaker to avoid load shading and short circuit failure. There is an RCCB to prevent overload and it indicates through a digital interface that is so easy for users.

This model has a capacity of 6 gallons of compressed air at a time. The steel made pancake type sink allows an average amount of air at a time for domestic uses.

It has a 2.6 SCFM recovery time for being cooled and being loaded again. At a time it allows 90 psi pressure through the outlet valve. It is designed to maintain the ISO 1217 cautions, in scientific processes.

This setup is run by water as the lubricant. There are various filters to purify the water. Not only have these there are particular driers to remove water stains. The used or dirty water has a drainage system for wiping out.

There is low Amp, 120 VA induction motor that can provide a suitable power instead of having cold weather. In various models, in presence of moisture, the motor does not run or not efficient. But this motor does not care about changing temperature and it is a series of heavy duty motor.

There are proper circuit breakers with the electric circuit. It prevents the Short Circuit and air leakages by switching off the motor instantly.

The pancake-like air compressor is small to carry and its weight is only 31 pounds. So for domestic use or in emergency purposes, it can be used.

The regulated valves control the coming pressures for sustainability. For this, if there is any leakage or the intake pressure is high; it releases some pressure and switches off the valve by disconnecting of the power source.

The intake and exhaust pressure can be measured by two analog meters separately. The amount of air used and the amount of air remaining in the sink can be seen by the gauge readings. The company has given 1 year of complete replacement if there is any manufacturing defects or leakages.