Best garage wall car door protector strips, panels and protection ideas

• Take the stress out of coming home to your right garage stop and hit your mark perfectly each time with our EZ Park parking aids
• Don’t worry about replacing old batteries for a laser or plugging into outlets. our parking ball solutions requires no electrical connections
• An easy to follow step by step guide is directly printed on the back of our packaging a simple yet elegant garage gadget. The ultimate wall protector!
• Works on all vehicle and garage types our parking stops comes with an adjustable clip for all types of cars. we also include 2 systems for a double garage or as a gift!
• Our system is like a little floating yellow stop sign it turns parking in the garage from anxious to fun. If you have any problems whatsover we offer a full 100 money back no questions asked guarantee!
• Package Dimensions 9.2 x 4.6 x 2.2 inches
• Item Weight 4 ounces

It fits well, and the price is good. And I didn’t have any problems with the installation (well, if you are fine with using a ladder, so it would be ok for you too). The height is adjusted (it touches the windshield after the installation). Due to this, you can easily adjust a distance for your car.

I had a laser parking guide before it, but it was not very convenient because it required a plug to plug it in. As I didn’t see the laser unless it was shining on the dash, it was rather difficult to put the car left or right. Due to the ball solution, I see the ball when I enter the garage, and it helps to steer.

I also considered the options with the battery powered systems, but I could not place it in my garage, and I didn’t want that someone could stumble when the car would be outside. Of course, someone could run into this small ball, but it is not like you could fall. And I like this positive and bright ball with a smiley face.

I bought this one for my mother. She always has stress while she is parking in the garage. She gets out the car to make sure that the car is far enough, or she puts the car too close and it blocks the door of the house, so she had to walk around the car. She is 80, and any distance at this age takes much efforts.

I have installed this yellow ball, and now my mom is very confident. She now puts the car side to side every time, and she knows that she does it right. And this smiley face makes her smile and think positive, even when it comes to parking.

The installation is simple. Place your car where it should be, and then use your ladder and hold the string and let it hang down to the car windshield. Then mark the place on the ceiling, remove your car, and you should secure the ball safely.

The only thing I don’t like is the threaded eyelets. They are small. It is not able to penetrate through the drywall ceiling into backing or stud. The option is to screw into the drywall supporting the weight of the ball. But when the car is not in the garage, this ball hangs freely, and you can just bump this wall from time to time. I decided to use a hook. And there was two option to use it. The first option is to use a wood threaded screw to find a stud above the location. The second option is to use the hollow ceiling anchor with the butterfly system. So I went for the second option. And I could easily adjust the height I needed.

So, this thing makes the parking issues easier in one and the same place all the time. Its goal is achieved.

• Best Protection by DOUBLE Thickness – 1/4″ thickness surface provides heavy protection for your car door and garage wall to prevent damage caused by any heavy impacts. It is greater or equal to twice the thickness of other brand of garage wall protectors.
• Top Grade & Eco-Friendly Material – The protectors are made of EVA material, which has RoHS authentication. It is totally environment friendly material. Let us go Green!!
• Full Protection & Suitable for Types of Walls – Scratch resistant soft foam strip for garages. Each strip size is 79″x 8″x 1/4″. And also the strip can be cut into multi pieces or different shapes, which fits for any types of walls.
• Exquisite Surface Design – Details make all the difference. This garage car door protector has been applied with the most exquisite design in the world. Any water drop or water flushing be resisted by special textures and grooves. It is also very easy to be cleaned.
• Double Protection by Dual Strip Pack – A set of two garage wall strip ensures both sides of car doors and garage walls will be fully protected.
• Package Dimensions 9.7 x 8.2 x 5.5 inches
• Item Weight 7 ounces

If you are from Texas, the adhesives and heat are not a good mixture. This product is easily installed in the garage. It protects well the car from any scratches. I like the surface textures, it is so soft and thick, and nice-looking. Now I know that ¼ thickness is the right size for the perfect protection. I used just one pad because the car doors fit well to this size. But it is good to have spare pad in case I want to prolong or add the additional layer. During the installation my husband and I used a level. Then we peeled a thin layer of the backing. My husband peeled the rest of the backing, and I just continued to apply the pad using the level. The installation just took several minutes, and we didn’t have any problems at all. Oh, I also kept the pad on the floor for a week to make it even. If anything is going to change, I will let you know.

Well, I accidently bumped my car door cause I opened widely in the garage. And I thought that there should be some bumper for the wall. At first, I was looking for the plastic rubber bumper, but then I decided to go around the door frame. But then I found foam wall bumper. It had better reviews, deeper thickness, and a fabric weave for keeping it together.

So, as you guessed, I used this bumper, and it is now 6 months and it is kept well. The installation was simple. First off, I cleaned the concrete wall from the dust and any rough ends. I just used the damp towel on it, and then I let the wall dry for a night. Then I used a level to apply this protector evenly. And that was it. It is now applied evenly and nice.

I did it with the door frame. I also cleaned it with wet towel, and then let it dry. I used this protector on the door frame where the car door contacts it. It sticks well to the edges, and in 6 months, it is still there.
Check the price

• Maximum protection for your car door
• Includes all hardware to mount to drywall, studs, brick and concrete
• Holes are 16-Inch and 24-Inch apart for mounting to studs
• Lifetime warranty
• Product Dimensions 26 x 8 x 1 inches
• Item Weight 14.4 ounces

I must say that our designer of the garage built this place for bicycles only because a standard car does not fit well there. That is why this product is a panacea for our car and garage. Now we do not afraid that the door can be scratched because we have this great protection. This item is really a great thing. It just helps us to solve our space issues. Thanks!

We have some place in a condo garage, and it is right to the concrete wall. I always worry that I may damage a bumper, or a door when I get into this place. I found this protection on Amazon, and I ordered them at once. I like the bright color, and it works well as a visual cue. It comes with screws, but I cannot apply them. So I used a universal glue you may find in the big shops. So I glued it on the wall, and it worked well. Now I am safe.

• Excellent Multilayer Protection – Each strip size is 16″ x 6″ x 7/8″. 7/8″ nitrile rubber plus 0.11″ EVA padding provide perfect impact absorption up to 441 lb, preventing damage from any potential impacts when parking in the garage.
• Unique Nitrile Rubber Material – Excellent impact absorption and soft touch on the surface are provided by unique nitrile rubber. Nitrile rubber is odorless and harmless environmental friendly material commonly used in the medical industry.
• Cuttable & Flexible – Each strip can be cut into multi pieces or different shapes. Perfect flexibility and softness provided by its just right thickness allow the wall protectors to be applied on 90-degree wall, curved surface or cylinder column.
• Fiberglass Mesh Adhesive Structure – The adhesive force is reinforced by its unique integrated back adhesive structure. The interlaced fiberglass allows the wall protectors to be removed without tearing the soft protector or leaving marks on the wall. The non-tearing self-adhesive cover can be peeled off easily.
• What you will get – Garage Smith GWP03 Car Door Protector x 4, 1-day response customer service and technical support, and worry-free 6-month warranty.
• Package Dimensions 15.8 x 5.9 x 3.9 inches
• Item Weight 1 pounds

Why I didn’t buy these several years ago? Now I do not worry about my car door when I open it in the garage. I tested this product in the garage of my son, and it was great. It is rather strong and sticky, and I don’t think about any scratches anymore. I definitely recommend this item.

I have a new car, and as I have a narrow drive way in front of the house, I applied these guards. I just do not want to spoil my new car. So I used the stripes on the narrowest spots. I used them outside, so I am not sure if it last long. But it copes with the task well so far.

• PROTECTIVE GARAGE WALL MAT – Protect your garage walls and the doors of your prized automobile! Our garage door protector is a breeze to apply to any type of wall and prevents moderate-level impact damage from opening car doors. Strong adhesive reinforced with fiber mesh ensures exceptional bonding and no residue when removed. Single roll with 2 soft foam strips (79 x 8 x 1/4 inches each)
• SUPER-THICK FOR SUPERIOR PROTECTION – At 1/4 inches thick, our garage door bumper offers outstanding performance, acting as a buffer between walls and objects. That includes vehicles, machinery, and garage gadgets! It’s tough yet lightweight and flexible, resists abrasions, is easy to clean, and can be cut to your preferred size
• SAFEGUARDS AGAINST SCRATCHES AND DENTS – No marks or damage to your car doors and no scratches on the garage door guard either! Plus, you get dual protection with a strip for each side of your garage. What’s more, it looks stylish and professional!
• WATER AND MILDEW RESISTANT – Special surface treatment and grooves repel water so no mold can grow on or under the strips. Utilizing garage accessories like these protective strips will help maintain your garage and ensure the longevity of everything stored in it
• PRO-GRADE ECO-FRIENDLY EVA – Odorless, durable, high-performance material with RoHS authentication. 6-Month Guarantee makes this a risk-free purchase! Place your order today to stop damage in its tracks and keep your car and garage looking pristine
• Package Dimensions 9.5 x 5 x 5 inches
• Item Weight 13.6 ounces

We have a big garage for two cars. And my husband tries to leave more space for me. And so he has pro skills at parking, closely to the side of the garage. I bought this door mat protection. And he was really happy because now he could open the Mercedes door without any problems. We also put the second one on my side. But I think my husband will still leave me more space ;).

It is a great protection that fits the wall in the garage. The size is good, and it also looks great and soft! Due to this protection, you are just secured, and I do not worry about my car. It is very convenient and the price is reasonable.