Best parts washer for garage, portable parts washer cleaner

What are parts washers?

You may also know a parts washer as a parts cleaner. It is a tub created to clean car details in. It contains a solvent that provides a possibility of soaking and scrubbing parts with some rags, metal brushes, or even toothbrush. Parts washers are usually equipped with pumps that circulate the solvent though a hose. Due to this, any user is able to rinse car details with a water stream. In fact, this item is good to decrease engine internals, wheel bearings, carburetor parts, and other metal details. It would be a great option, if you work with car parts a lot.

Also, parts washers have different sizes and shapes, and are usually electric. The most demanded models are floor standing with unchanged floor space. Benchtop washers are considered the best option because they are portable, easy to use and store, and have limited capacities. They easily clean parts, and solvent disposal is not messy.

If you are tired to clean your parts in the sink and then clean the sink, you may start considering the alternative. You go to the internet and read a lot of different reviews about parts washers, and now you may be confused. We recommend you to pay attention to the following questions before buying any parts washer.

GPM of pump

Mainly, buyers pay attention to the reviews and consider different numbers that really matter. You should know that pump is important, and you should know its capacity. Pay attention to gallons per minute (GPM) of the pump. Its volume is more important than the pressure.

Will you be able to disassemble the parts washer?

Of course, the removable items may bring you more work, but in this case, the parts washer may be easily cleaned. It means that a regular cleaning of the parts washer will elongate the life of this item. Sometimes, it is better to change some detail of the product than the whole product.

Washer heat production

It is better to pay attention to devices that act between 170 and 175 degrees. If your washer has lower degrees, it will take more time to heat up before you may use it. So, if you want to save some time, it is better to buy parts washer with good heat production.

Parts Washer Advantages

Buying a new parts washer is a good investment for the vehicles as well as for the lifestyle. Here are some advantages of the parts washer.

• No more Grime! A parts washer of high quality makes car details clean and nice. You will forget about the grime on your car.
• Friendly to the environment. The parts washer can clean greasy parts of the bicycle, and change carbon-based containment into nontoxical liquid. It means that our planet will be healthier due to less amount of carbon-dioxide.
• Smart and long-run investment! You will save your time and money when you buy quality parts washer that consists of the durable materials and is resistant to rust for many years.

Safety Recommendations for Cleaning

Every specialist in mechanics knows that safety is essential during the work with the vehicle details. Buying parts washers, you should know some safety rules to have a safe cleaning.

• Make sure you have enough space around your washer. You should know all operations of the machine and ways how to turn it on and off. Due to this, you will avoid bad situations.
• Make sure that you have enough ventilated air in your garage. When you work with the parts washer, you use chemical liquids, and so you should not inhale these toxic things. When you are going to clean any item, open windows or door in the garage to let the air in.
• The lid should close automatically. It is always dangerous to work with solvents. There are models that have a safety automatic lid closure. You may also find it as a fusible link. In case of an emergency, the lid will close automatically. This way, the fire does not spread, and you will not be affected. Also, when you leave your washer for some time, make sure to close the lid.

There are parts washers with solvent gallons. The amount of solvent depends on a size of your washer. It is kept at the bottom of the parts washer. There is a pump that pumps clear solvent through the nozzle. The grease and dirt go to the bottom of the tank.

You may also find water parts washers. This type of the parts washers use detergent, heat, and energy to provide enough cleaning power. Heating is used as a turntable. Also, an electrical motor may be used for driving a centrifugal pump. That is why, your pump and nozzles should be of high quality in order to have a smooth process!
How to use a parts washer?

The usage is simple: just put your dirty item into the washer, turn it on and let it do the rest! Some models of the parts washers are equipped with nozzles that line the walls for easier life.

What solvent should be used in a parts washer?

Petroleum solvent is used in the parts washer. It is kept in a pan at the washer bottom. Electric liquid is soaked into the solvent to create clean solvent from the top of the tank. Then it is pumped at the low pressure for items cleaning. In addition, petroleum solvents are flammable and cannot be disposed! And so, many people prefer water parts washers. Alkaline water-based solutions remove grease and dirt, they do not dissolve them like solvent washers. In fact, the greatest benefit of them is that water parts washers are non-flammable, and non-hazardous. Also, you will spend less costs for its management.

As you see, you have an option. If you work with highly grimy items every day, you should consider petroleum solvents. And if you do not work a lot with those items, the water-based washers generate less vapors, and so you will be protected and avoid health issues. It is up to you what to choose!